Home / Tile Grout / Polymer Modified
Niteotex Polymer Modified Tile Grout is a water-resistant cement-based high-quality free powder suitable for both interior and exterior applications. It is specifically designed for floor tile and wall tile joints, providing excellent durability and water resistance.
Our polymer-modified TILE GROUT is a water-resistant cement-based high-quality free powder for interior and exterior applications. It is specifically formulated for floor tile and wall tile joints, providing excellent adhesion and durability.
Our polymer-modified TILE GROUT is a water-resistant cement-based high-quality free powder for interior and exterior. It is suitable for floor tile and wall tile joints.
Mix 200ml of water with Tile Grout powder. Ensure proper mixing to achieve consistent paste.
Ensure tile joints are clean, dry, and free from dust, grease, or any contaminants before application.
Note: The tile adhesive is applied in a thin layer by means of a notched trowel.
| Properties | Results |
|---|---|
| Pot Life | 120 Mins |
| Open Time | 60 Mins |
| Adjustibility Time | 15-20 Mins |
| Initial Setting Time | 2 Mins |
| Final Setting Time | 12 Mins |
| Shrinkage | -0.1% |
All technical specifications are based on laboratory tests under standard conditions. Actual performance may vary based on site conditions and application methods.
For the adhesive levelling and equalizing surface. Essential for proper application and achieving uniform thickness.
Recommended for applying tile adhesive in a thin, uniform layer with proper notching for better adhesion.
Clean container for mixing grout with water to achieve proper consistency.
For applying grout into joints and cleaning excess grout from tile surfaces.
Ensure tile joints are clean, dry, and free from dust or debris. Check that tiles are properly fixed and stable.
Mix 200ml of clean water with Tile Grout powder. Mix thoroughly until you achieve a smooth, lump-free consistency.
Apply the grout using a rubber float at a 45-degree angle. Press firmly to fill joints completely.
After 15-20 minutes, clean excess grout from tile surface using a damp sponge. Rinse sponge frequently.
Allow 24 hours for initial curing. Avoid water contact for 48 hours. Full strength develops in 7 days.
Our purpose Is to Sustainably Make the pleasure and Benefits of Good and Better products Accessible to the many.